A hand dryer is an electric device used to dry hands after washing them. It works by blowing warm or hot air onto the hands, evaporating the water droplets on the skin’s surface and leaving the hands dry.
Hand dryers are commonly found in public restrooms, where they are used as a more hygienic and eco-friendly alternative to paper towels. They are typically mounted on walls and activated either by a push button or an infrared sensor. Some hand dryers also feature high-speed air streams or specialized filters to reduce the spread of germs and bacteria.
Where the hand dryer will be used?
Hand dryers are typically used in public restrooms, such as those found in airports, restaurants, offices, schools, and other public places. They are also commonly found in healthcare facilities, where hygiene is especially important. Hand dryers are often preferred over paper towels in these settings because they are more environmentally friendly, as they do not create waste, and they are more cost-effective in the long run.
Additionally, hand dryers are generally considered to be more hygienic than paper towels, as they do not require any contact with a shared surface or bin. They also typically have features such as HEPA filters or UV-C lights to help prevent the spread of germs and bacteria. Overall, hand dryers are a convenient and practical solution for drying hands in public restrooms.
The parts of a hand dryer
The specific parts of a hand dryer can vary depending on the manufacturer and model, but most hand dryers have the following basic components:
Outer shell: This is the outer casing of the hand dryer, which provides protection for the internal components and a surface for mounting the device on a wall.
Heating element: This is a heating coil or element that heats the air blown by the hand dryer. It is usually made of metal and is powered by electricity.
Blower fan: This is a motorized fan that draws air into the hand dryer and then blows it out through a nozzle at high velocity to dry the hands.
Sensor or button: This is a mechanism that activates the hand dryer when a user’s hands are placed under the nozzle. In some models, the hand dryer is activated by a physical button instead.
Filter: Many hand dryers include a filter, which captures dust and other particles in the air to prevent them from being blown onto the user’s hands.
Circuit board: This is the electronic control board that manages the functions of the hand dryer, such as turning on and off, regulating the heating element and fan speed, and detecting when a user’s hands are present.
Power cord: This is the electrical cord that connects the hand dryer to an electrical outlet.
These are the main components found in most hand dryers, but some models may have additional features, such as adjustable nozzle positions, energy-saving modes, or built-in antimicrobial technologies.
The micro switch in a hand dryer
A micro switch is a type of switch commonly used in hand dryers and other electronic devices. It is a small, low-power electrical switch that is activated by a small physical motion, such as the pressing of a button or the movement of a lever. In a hand dryer, the micro switch is typically used to detect when a user’s hands are present under the nozzle, so that the dryer can activate the blower fan and heating element.
The micro switch is usually mounted within the nozzle or the housing of the hand dryer and is connected to the circuit board. When a user’s hands are detected by the switch, it sends a signal to the circuit board to activate the blower fan and heating element. Once the user’s hands are removed from the nozzle, the switch is triggered again, sending a signal to turn off the fan and heating element.
The micro switch is an important component of a hand dryer as it enables the device to detect when a user is present and to operate only when needed. This helps to conserve energy and prolong the lifespan of the hand dryer.
How the micro switch works in the hand dryer?
In a hand dryer, the micro switch is typically mounted within the nozzle or the housing of the dryer, and is connected to the circuit board. When a user’s hands are placed under the nozzle, they trigger the micro switch by pressing down on a lever or button, depending on the type of micro switch used.
The micro switch is designed to detect this small physical motion, and when it is triggered, it sends an electrical signal to the circuit board. The circuit board then activates the blower fan and heating element, which blows warm or hot air onto the user’s hands to dry them.
Once the user removes their hands from under the nozzle, the lever or button on the micro switch returns to its original position, and the switch is triggered again. This sends another electrical signal to the circuit board, which then turns off the blower fan and heating element.
The micro switch is an essential component of the hand dryer, as it enables the dryer to detect when a user is present and to operate only when needed. This helps to conserve energy and reduce the cost of operation, making hand dryers a more environmentally-friendly and cost-effective alternative to paper towels in public restrooms.
For more switch for hand dryer information, welcome to click the link to see or contact us to know more product details. Our micro switch have UL, ENEC, and CQC certifications as well as we can provide them to you.